Beyond Linux® From Scratch (systemd Edition) - Version 11.0

Chapter 13. Programming

Git-2.33.0

Introduction to Git

Git is a free and open source, distributed version control system designed to handle everything from small to very large projects with speed and efficiency. Every Git clone is a full-fledged repository with complete history and full revision tracking capabilities, not dependent on network access or a central server. Branching and merging are fast and easy to do. Git is used for version control of files, much like tools such as Mercurial-5.9, Bazaar, Subversion-1.14.1, CVS, Perforce, and Team Foundation Server.

This package is known to build and work properly using an LFS-11.0 platform.

Package Information

  • Download (HTTP): https://www.kernel.org/pub/software/scm/git/git-2.33.0.tar.xz

  • Download MD5 sum: 0990ff97af1511be0d9f0d3223dd4359

  • Download size: 6.2 MB

  • Estimated disk space required: 332 MB (with downloaded documentation, add 16 MB to build documentation)

  • Estimated build time: 0.4 SBU (with parallelism=4; add 0.4 SBU for building documentation and 2.1 SBU for tests, both with parallelism=4)

Additional Downloads

Git Dependencies

Recommended

cURL-7.78.0 (needed to use Git over http, https, ftp or ftps)

Optional

GnuPG-2.2.29 (runtime, may be used to sign Git commits or tags, or verify the signatures of them), OpenSSH-8.7p1 (runtime, needed to use Git over ssh), pcre2-10.37 (or the deprecated PCRE-8.45), in either case configured with --enable-jit, Subversion-1.14.1 with Perl bindings (runtime, for git svn), Tk-8.6.11.1 (gitk, a simple Git repository viewer, uses Tk at runtime), Valgrind-3.17.0, Authen::SASL and MIME::Base64 (both runtime, for git send-email)

Optional (to create the man pages, html docs and other docs)

xmlto-0.0.28 and asciidoc-9.1.0 , and also dblatex (for the PDF version of the user manual), and docbook2x to create info pages

User Notes: https://wiki.linuxfromscratch.org/blfs/wiki/git

Installation of Git

Install Git by running the following commands: 

./configure --prefix=/usr \
            --with-gitconfig=/etc/gitconfig \
            --with-python=python3 &&
make

You can build the man pages and/or html docs, or use downloaded ones. If you choose to build them, use the next two instructions.

If you have installed asciidoc-9.1.0 you can create the html version of the man pages and other docs: 

make html

If you have installed asciidoc-9.1.0 and xmlto-0.0.28 you can create the man pages: 

make man

The test suite can be run in parallel mode. To run the test suite, issue: make test. If run as a normal user, 0 tests should be reported as failed in the final summary.

Now, as the root user: 

make perllibdir=/usr/lib/perl5/5.34/site_perl install

If you created the man pages and/or html docs

Install the man pages as the root user: 

make install-man

Install the html docs as the root user: 

make htmldir=/usr/share/doc/git-2.33.0 install-html

If you downloaded the man pages and/or html docs

If you downloaded the man pages untar them as the root user: 

tar -xf ../git-manpages-2.33.0.tar.xz \
    -C /usr/share/man --no-same-owner --no-overwrite-dir

If you downloaded the html docs untar them as the root user: 

mkdir -vp   /usr/share/doc/git-2.33.0 &&
tar   -xf   ../git-htmldocs-2.33.0.tar.xz \
      -C    /usr/share/doc/git-2.33.0 --no-same-owner --no-overwrite-dir &&

find        /usr/share/doc/git-2.33.0 -type d -exec chmod 755 {} \; &&
find        /usr/share/doc/git-2.33.0 -type f -exec chmod 644 {} \;

Reorganize text and html in the html-docs (both methods)

For both methods, the html-docs include a lot of plain text files. Reorganize the files as the root user: 

mkdir -vp /usr/share/doc/git-2.33.0/man-pages/{html,text}         &&
mv        /usr/share/doc/git-2.33.0/{git*.txt,man-pages/text}     &&
mv        /usr/share/doc/git-2.33.0/{git*.,index.,man-pages/}html &&

mkdir -vp /usr/share/doc/git-2.33.0/technical/{html,text}         &&
mv        /usr/share/doc/git-2.33.0/technical/{*.txt,text}        &&
mv        /usr/share/doc/git-2.33.0/technical/{*.,}html           &&

mkdir -vp /usr/share/doc/git-2.33.0/howto/{html,text}             &&
mv        /usr/share/doc/git-2.33.0/howto/{*.txt,text}            &&
mv        /usr/share/doc/git-2.33.0/howto/{*.,}html               &&

sed -i '/^<a href=/s|howto/|&html/|' /usr/share/doc/git-2.33.0/howto-index.html &&
sed -i '/^\* link:/s|howto/|&html/|' /usr/share/doc/git-2.33.0/howto-index.txt

Command Explanations

--with-gitconfig=/etc/gitconfig: This sets /etc/gitconfig as the file that stores the default, system wide, Git settings.

--with-python=python3: Use this switch to use Python 3, instead of the EOL'ed Python 2. Python is used for the git p4 interface to Perforce repositories, and also used in some tests.

--with-libpcre2: Use this switch if PCRE2 is installed and has been built with the non-default JIT enabled.

--with-libpcre: As an alternative to PCRE2, use this switch if the deprecated PCRE is installed and has been built with the non-default JIT enabled.

tar -xf ../git-manpages-2.33.0.tar.gz -C /usr/share/man --no-same-owner: This untars git-manpages-2.33.0.tar.gz. The -C option makes tar change directory to /usr/share/man before it starts to decompress the docs. The --no-same-owner option stops tar from preserving the user and group details of the files. This is useful as that user or group may not exist on your system; this could (potentially) be a security risk.

mv /usr/share/doc/git-2.33.0 ...: These commands move some of the files into subfolders to make it easier to sort through the docs and find what you're looking for.

find ... chmod ...: These commands correct the permissions in the shipped documentation tar file.

Configuring Git

Config Files

~/.gitconfig and /etc/gitconfig

Contents

Installed Programs: git, git-receive-pack, git-upload-archive, and git-upload-pack (hardlinked to each other), git-cvsserver, git-shell, and gitk
Installed Libraries: None
Installed Directories: /usr/libexec/git-core, and /usr/share/{doc/git-2.33.0,git-core,git-gui,gitk,gitweb}

Short Descriptions

git

is the stupid content tracker

git-cvsserver

is a CVS server emulator for Git

gitk

is a graphical Git repository browser (needs Tk-8.6.11.1)

git-receive-pack

is invoked by git send-pack and updates the repository with the information fed from the remote end

git-shell

is a login shell for SSH accounts to provide restricted Git access

git-upload-archive

is invoked by git archive --remote and sends a generated archive to the other end over the git protocol

git-upload-pack

is invoked by git fetch-pack, it discovers what objects the other side is missing, and sends them after packing

Last updated on