The mdadm package contains administration tools for software RAID.
This package is known to build and work properly using an LFS-11.1 platform.
Download (HTTP): https://www.kernel.org/pub/linux/utils/raid/mdadm/mdadm-4.2.tar.xz
Download MD5 sum: a304eb0a978ca81045620d06547050a6
Download size: 444 KB
Estimated disk space required: 5.0 MB
Estimated build time: 0.1 SBU
A MTA
User Notes: https://wiki.linuxfromscratch.org/blfs/wiki/mdadm
Kernel versions in series 4.1 through 4.4.1 have a broken RAID implementation. Use a kernel with version at or above 4.4.2.
Enable the following options in the kernel configuration and recompile the kernel, if necessary. Only the RAID types desired are required.
Device Drivers --->
[*] Multiple devices driver support (RAID and LVM) ---> [CONFIG_MD]
<*> RAID support [CONFIG_BLK_DEV_MD]
[*] Autodetect RAID arrays during kernel boot [CONFIG_MD_AUTODETECT]
<*/M> Linear (append) mode [CONFIG_MD_LINEAR]
<*/M> RAID-0 (striping) mode [CONFIG_MD_RAID0]
<*/M> RAID-1 (mirroring) mode [CONFIG_MD_RAID1]
<*/M> RAID-10 (mirrored striping) mode [CONFIG_MD_RAID10]
<*/M> RAID-4/RAID-5/RAID-6 mode [CONFIG_MD_RAID456]
Build mdadm by running the following command:
make
This package does not come with a working test suuite.
Now, as the root
user:
make BINDIR=/usr/sbin install
make everything: This optional target creates extra programs, particularly a statically-linked version of mdadm. This needs to be manually installed.
--keep-going
: Run the tests
to the end, even if one or more tests fail.
--logdir=test-logs
: Defines
the directory where test logs are saved.
--save-logs
: Instructs the
test suite to save the logs.
--tests=
:
Optional comma separated list of tests to be executed (all tests,
if this option is not passed).
<test1,test2,...>
Last updated on