Kernel
Configuration
Enable the following options in the kernel configuration (choose
client and/or server support as appropriate) and recompile the
kernel if necessary:
File systems --->
[*] Network File Systems ---> [CONFIG_NETWORK_FILESYSTEMS]
<*/M> NFS client support [CONFIG_NFS_FS]
<*/M> NFS server support [CONFIG_NFSD]
Select the appropriate sub-options that appear when the above
options are selected.
![[Note]](../images/note.png)
Note
In BLFS we assume that nfs v3 will be used. If the server offers nfs v4 (for linux,
CONFIG_NFSD_V4) then auto-negotiation for v3 will fail and you
will need to add nfsver=3 to the
mount options. This also applies if that option is enabled in the
client's kernel, for
example in a distro trying to mount from a BLFS v3 server.
Installation
of NFS Utilities
Before you compile the program, ensure that the nobody user and nogroup group have been created as done in the
current LFS book. You can add them by running the following
commands as the root user:
groupadd -g 99 nogroup &&
useradd -c "Unprivileged Nobody" -d /dev/null -g nogroup \
-s /bin/false -u 99 nobody
Note
The classic uid and gid values are 65534 which is also -2 when
interpreted as a signed 16-bit number. These values impact other
files on some filesystems that do not have support for sparse
files. The nobody and
nogroup values are relatively
arbitrary. The impact on a server is nil if the exports file is configured correctly. If it is
misconfigured, an ls
-l or ps listing will show a uid or
gid number of 65534 instead of a name. The client uses
nobody only as the user running
rpc.statd.
Install NFS Utilities by running
the following commands:
./configure --prefix=/usr \
--sysconfdir=/etc \
--without-tcp-wrappers \
--disable-nfsv4 \
--disable-gss &&
make
If your /usr directory is NFS
mounted, you should install the executables in /sbin by passing an additional parameter
--sbindir=/sbin to the above
./configure command.
Now, as the root user:
make install &&
chmod u+w,go+r /sbin/mount.nfs
The tests for this package require that the package be installed
and configured as specified below. In addition, the the daemon from
rpcbind-0.2.3 needs to be running and the tests
need to be run as the root user.
To test the results, issue, as root: make check.
Command Explanations
--without-tcp-wrappers:
This option is needed because TCP Wrappers is not in BLFS.
--disable-nfsv4: This
allows the package to be built when libnfsidmap has not been
installed.
--disable-gss: Disables
support for RPCSEC GSS (RPC Security).
Configuring NFS Utilities
Server Configuration
/etc/exports contains the exported
directories on NFS servers. Refer to the exports.5 manual page for the syntax of this
file. Also refer to the "NFS HowTo" available at http://nfs.sourceforge.net/nfs-howto/
for information on how to configure the servers and clients in a
secure manner. For example, for sharing the /home directory over the local network, the
following line may be added:
/home 192.168.0.0/24(rw,subtree_check,anonuid=99,anongid=99)
Note
Be sure to replace the directory, network address. and prefix
above to match your network. The only space in the line above
should be between the directory and the network address.
Install the /etc/rc.d/init.d/nfs-server init
script included in the blfs-bootscripts-20160902 package to
start the server at boot.
make install-nfs-server
Now create the /etc/sysconfig/nfs-server configuration file:
cat > /etc/sysconfig/nfs-server << "EOF"
PORT="2049"
PROCESSES="8"
QUOTAS="no"
KILLDELAY="10"
EOF
Note
The above parameters may be optionally placed in /etc/sysconfig/rc.site.
Client Configuration
/etc/fstab contains the directories
that are to be mounted on the client. Alternately the partitions
can be mounted by using the mount command with the proper
options. To mount the /home and
/usr partitions, add the following
to the /etc/fstab:
<server-name>:/home /home nfs rw,_netdev 0 0
<server-name>:/usr /usr nfs ro,_netdev 0 0
The options which can be used are specified in man 5 nfs. If both the client
and server are running recent versions of linux, most of the
options will be negotiated. You can specify either rw or ro,
_netdev if the filesystem is to be
automatically mounted at boot, or noauto (and perhaps user) for other filesystems.
If the fileserver is not running a recent version of linux, you
may need to specifiy other options.
If you are using systemd, you may need to enable autofs v4 in
your kernel, and add the option comment=systemd.automount. Some machines need
this, because systemd tries to mount the external fs's before the
network is up, others do not need it. An alternative is for
root to run mount -a.
Note
The following boot script is not required if the
nfs-server script is installed.
Install the /etc/rc.d/init.d/nfs-client init
script included in the blfs-bootscripts-20160902 package to
start the client services at boot.
make install-nfs-client
To automatically mount nfs
filesystems, clients will also need to install the netfs bootscript as described in Configuring for Network
Filesystems.