AUTHOR:         Jim Gifford <lfs-hints at jg555.com>
		
DATE: 		2003-03-25

LICENSE: 	GNU Free Documentation License Version 1.2

SYNOPSIS:	How to setup ethernet bonding with LFS.

DESCRIPTION:	This hint will provide the necessary information for
		ethernet interface teaming.

PREREQUISITES:	Backup your /etc/syconfig/network-devices before you
		start this hint.

HINT:

BACKGROUND:

Ethernet bonding allows you combine ethernet interfaces. You can have
then setup in a few different modes.

	Round Robin - This mode provides load balancing and fault tolerance.

	Active Backup - This mode provides fault tolerance.

I have tried to make this hint as easy as possible, but if you have any
suggestions or comment, please email me	at the email address above.

SOURCE:

Everything you need is included in the linux source code.

INSTALLATION:

Kernel Settings

	In the 2.4 and 2.6 Kernel, you will need to add the following option
	to build your kernel.

	2.4
		Network device support  --->
			<M> Bonding driver support
				    or
			<*> Bonding driver support

	2.6

		Device Drivers  --->
			Networking support  --->
				<M>     Bonding driver support
						or
				<*>     Bonding driver support 

	At this point you can recompile your kernel.

-----
Bootscript Changes		

	After you are finished recompiling your kernel you will need to go to 
	the Documentation/networking directory in your linux kernel source files.

	You will find a program called ifenslave.c. You will need to compile the
	program in the following manner.

	gcc -O -I/usr/src/linux/include ifenslave.c -o ifenslave
	cp ifenslave /sbin
	chmod 755 /sbin/ifenslave


	Now we will need to create a new ifup and ifdown that is compatible with
	bonding.

	cat > /etc/sysconfig/network-devices/ifup << "EOF"
	#!/bin/sh

	source /etc/sysconfig/rc 
	source $rc_functions 
	source $network_devices/ifconfig.$1 

	if [ -f $network_devices/ifup-$1 ]
		then
			$network_devices/ifup-$1
		else
			if [ -z $IP ] && [ -z $SLAVE ]
				then
					echo "IP variable missing for ifconfig.$1, cannot continue"
					exit 1
			fi
	
			if [ -z $NETMASK ] && [ -z $SLAVE ]
				then 
					echo -n "NETMASK variable missing for ifconfig.$1, "
					echo "using 255.255.255.0"
					NETMASK=255.255.255.0
			fi

			if [ -z $BROADCAST ] && [ -z $SLAVE ]
				then
					echo -n "BROADCAST variable missing for ifconfig.$1, "
					echo "using default address"
			fi

			if [ -z $SLAVE ]
				then
					echo "Bringing up the $1 interface..."
					ifconfig $1 $IP netmask $NETMASK broadcast $BROADCAST
					evaluate_retval
				else
					echo "Bringing up the $1 interface..."
					ifenslave $MASTER $1
					evaluate_retval
			fi
	fi
	EOF

	cat > /etc/sysconfig/network-devices/ifdown << "EOF"
	#!/bin/sh

	source /etc/sysconfig/rc 
	source $rc_functions 
	source $network_devices/ifconfig.$1 

	if [ -f $network_devices/ifdown-$1 ]
		then
			$network_devices/ifdown-$1
		else
			if [ -z $SLAVE ]
				then
					echo "Bringing down the $1 interface..."
					ifconfig $1 down
					evaluate_retval
			fi
	fi
	EOF

	Now we need to recreate our ifconfig.(interface files). You do not need to
	change your existing ones if the adapter is not going to be bonding partner.

	For interfaces that are not bonding members

	cat > /etc/sysconfig/network-devices/ifconfig.{interface_that_is_not_bonded} << "EOF"
	ONBOOT=yes
	IP={ip_address}
	NETMASK={subnet_mask}
	BROADCAST={broadcast_address}
	EOF

	The bonding interface is the interface name of now teamed ethernet interfaces.
	For the bonding interface. This will either be bond0
	cat > /etc/sysconfig/network-devices/ifconfig.bond0 << "EOF"
	ONBOOT=yes
	IP={ip_address}
	NETMASK={subnet_mask}
	BROADCAST={broadcast_address}
	EOF
	
	For interfaces that are bonding members

	cat > /etc/sysconfig/network-devices/ifconfig.{interface_that_is_bonded} << "EOF"
	ONBOOT=yes
	MASTER=bond0
	SLAVE=yes
	EOF
	
	******Explanation what we actually need to do.*******

	Ok this is the mosting confusing part. So I am going to give examples of the above
	files.

	eth0 is the wan interface.
	eth1 and eth2 are the lan interfaces for network 192.168.0.0

	ifconfig.eth0 would look like this
	
	ONBOOT=yes
	IP=64.30.195.78
	NETMASK=255.255.255.0
	BROADCAST=64.30.195.255
	
	ifconfig.bond0 would look like this

	ONBOOT=yes
	IP=192.168.0.1
	NETMASK=255.255.255.0
	BROADCAST=192.168.0.255

	ifconfig.eth1 and ifconfig.eth2 would look like this

	ONBOOT=yes
	MASTER=bond0
	SLAVE=yes
	
	Now when we boot, bond0 will be the team of eth1 and eth2.

-----	
Bootup Options

	You will need to add the following to your modprobe.conf for 2.6 or your
	modules.conf for 2.4

	alias bond0 bonding
	options bond0 miimon=100

-----
Did it work

	Now after you have rebooted, you can check to see if your bonding is working ok.

	You can run "ifconfig bond0", if you see data your probably fine. Make sure
	the IP addresses information is correct.

	Here is my output as a reference

	bond0     Link encap:Ethernet  HWaddr 00:00:D1:1F:20:49
        	  inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
	          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
        	  RX packets:36491 errors:0 dropped:0 overruns:0 frame:0
	          TX packets:37519 errors:57 dropped:0 overruns:5 carrier:52
	          collisions:1 txqueuelen:0
	          RX bytes:3295515 (3.1 Mb)  TX bytes:13366345 (12.7 Mb)

	You can also use cat /proc/net/bonding/bond0.

	Here is my output as a reference

	Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004)

	Bonding Mode: load balancing (round-robin)
	MII Status: up
	MII Polling Interval (ms): 100
	Up Delay (ms): 0
	Down Delay (ms): 0

	Slave Interface: eth1
	MII Status: up
	Link Failure Count: 0
	Permanent HW addr: 00:00:d1:1f:20:49

	Slave Interface: eth2
	MII Status: up
	Link Failure Count: 0
	Permanent HW addr: 00:00:d1:1f:20:4a

	Slave Interface: eth3
	MII Status: up
	Link Failure Count: 0
	Permanent HW addr: 00:00:d1:1f:20:4b

-----
Want more the one ethernet Team

	By default the bonding driver only allows one bonded group. If you want more teamed
	interfaces you can use the following commands.

	Change modprobe.conf or modules.conf
	
	change 	
		options bond0 miimon=100
	to
		options bond0 miimon=100 max_bonds={#_of_teams}

	example
		options bond0 miimon=100 max_bonds=3

		would create bond0 bond1 bond2

----
Changes to my existing Programs

	The only change is that you don't specify an eth{x} interface, you would
	specify the bond0 interface instead. 	

-----
For more Information

	For more information view in the kernel source Documentation/network/bonding.txt.


VERSION:        1.1

CHANGELOG:     	1.1 Fixed Date
		1.0 Initial Release

 New Version of this document can be viewed from http://cvs.jg555.com/viewcvs.cgi/lfs-hints