#!/bin/sh ######################################################################## # # Begin /lib/lsb/init-funtions # # Description : Run Level Control Functions # # Authors : Gerard Beekmans - [email protected] # : DJ Lucas - [email protected] # Update : Bruce Dubbs - [email protected] # # Version : LFS 7.0 # # Notes : With code based on Matthias Benkmann's simpleinit-msb # http://winterdrache.de/linux/newboot/index.html # # The file should be located in /lib/lsb # ######################################################################## ## Environmental setup # Setup default values for environment umask 022 export PATH="/bin:/usr/bin:/sbin:/usr/sbin" ## Set color commands, used via echo # Please consult `man console_codes for more information # under the "ECMA-48 Set Graphics Rendition" section # # Warning: when switching from a 8bit to a 9bit font, # the linux console will reinterpret the bold (1;) to # the top 256 glyphs of the 9bit font. This does # not affect framebuffer consoles NORMAL="\\033[0;39m" # Standard console grey SUCCESS="\\033[1;32m" # Success is green WARNING="\\033[1;33m" # Warnings are yellow FAILURE="\\033[1;31m" # Failures are red INFO="\\033[1;36m" # Information is light cyan BRACKET="\\033[1;34m" # Brackets are blue # Use a colored prefix BMPREFIX=" " SUCCESS_PREFIX="${SUCCESS} * ${NORMAL} " FAILURE_PREFIX="${FAILURE}*****${NORMAL} " WARNING_PREFIX="${WARNING} *** ${NORMAL} " SKIP_PREFIX="${INFO} S ${NORMAL}" SUCCESS_SUFFIX="${BRACKET}[${SUCCESS} OK ${BRACKET}]${NORMAL}" FAILURE_SUFFIX="${BRACKET}[${FAILURE} FAIL ${BRACKET}]${NORMAL}" WARNING_SUFFIX="${BRACKET}[${WARNING} WARN ${BRACKET}]${NORMAL}" SKIP_SUFFIX="${BRACKET}[${INFO} SKIP ${BRACKET}]${NORMAL}" BOOTLOG=/run/bootlog KILLDELAY=3 SCRIPT_STAT="0" # Set any user specified environment variables e.g. HEADLESS [ -r /etc/sysconfig/rc.site ] && . /etc/sysconfig/rc.site ## Screen Dimensions # Find current screen size if [ -z "${COLUMNS}" ]; then COLUMNS=$(stty size) COLUMNS=${COLUMNS##* } fi # When using remote connections, such as a serial port, stty size returns 0 if [ "${COLUMNS}" = "0" ]; then COLUMNS=80 fi ## Measurements for positioning result messages COL=$((${COLUMNS} - 8)) WCOL=$((${COL} - 2)) ## Set Cursor Position Commands, used via echo SET_COL="\\033[${COL}G" # at the $COL char SET_WCOL="\\033[${WCOL}G" # at the $WCOL char CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char CURS_ZERO="\\033[0G" ################################################################################ # start_daemon() # # Usage: start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args...] # # # # Purpose: This runs the specified program as a daemon # # # # Inputs: -f: (force) run the program even if it is already running. # # -n nicelevel: specify a nice level. See 'man nice(1)'. # # -p pidfile: use the specified file to determine PIDs. # # pathname: the complete path to the specified program # # args: additional arguments passed to the program (pathname) # # # # Return values (as defined by LSB exit codes): # # 0 - program is running or service is OK # # 1 - generic or unspecified error # # 2 - invalid or excessive argument(s) # # 5 - program is not installed # ################################################################################ start_daemon() { local force="" local nice="0" local pidfile="" local pidlist="" local retval="" # Process arguments while true do case "${1}" in -f) force="1" shift 1 ;; -n) nice="${2}" shift 2 ;; -p) pidfile="${2}" shift 2 ;; -*) return 2 ;; *) program="${1}" break ;; esac done # Check for a valid program if [ ! -e "${program}" ]; then return 5; fi # Execute if [ -z "${force}" ]; then if [ -z "${pidfile}" ]; then # Determine the pid by discovery pidlist=`pidofproc "${1}"` retval="${?}" else # The PID file contains the needed PIDs # Note that by LSB requirement, the path must be given to pidofproc, # however, it is not used by the current implementation or standard. pidlist=`pidofproc -p "${pidfile}" "${1}"` retval="${?}" fi # Return a value ONLY # It is the init script's (or distribution's functions) responsibility # to log messages! case "${retval}" in 0) # Program is already running correctly, this is a # successful start. return 0 ;; 1) # Program is not running, but an invalid pid file exists # remove the pid file and continue rm -f "${pidfile}" ;; 3) # Program is not running and no pidfile exists # do nothing here, let start_deamon continue. ;; *) # Others as returned by status values shall not be interpreted # and returned as an unspecified error. return 1 ;; esac fi # Do the start! nice -n "${nice}" "${@}" } ################################################################################ # killproc() # # Usage: killproc [-p pidfile] pathname [signal] # # # # Purpose: Send control signals to running processes # # # # Inputs: -p pidfile, uses the specified pidfile # # pathname, pathname to the specified program # # signal, send this signal to pathname # # # # Return values (as defined by LSB exit codes): # # 0 - program (pathname) has stopped/is already stopped or a # # running program has been sent specified signal and stopped # # successfully # # 1 - generic or unspecified error # # 2 - invalid or excessive argument(s) # # 5 - program is not installed # # 7 - program is not running and a signal was supplied # ################################################################################ killproc() { local pidfile local program local prefix local progname local signal="-TERM" local fallback="-KILL" local nosig local pidlist local retval local pid local delay="30" local piddead local dtime # Process arguments while true; do case "${1}" in -p) pidfile="${2}" shift 2 ;; *) program="${1}" if [ -n "${2}" ]; then signal="${2}" fallback="" else nosig=1 fi # Error on additional arguments if [ -n "${3}" ]; then return 2 else break fi ;; esac done # Check for a valid program if [ ! -e "${program}" ]; then return 5; fi # Check for a valid signal check_signal "${signal}" if [ "${?}" -ne "0" ]; then return 2; fi # Get a list of pids if [ -z "${pidfile}" ]; then # determine the pid by discovery pidlist=`pidofproc "${1}"` retval="${?}" else # The PID file contains the needed PIDs # Note that by LSB requirement, the path must be given to pidofproc, # however, it is not used by the current implementation or standard. pidlist=`pidofproc -p "${pidfile}" "${1}"` retval="${?}" fi # Return a value ONLY # It is the init script's (or distribution's functions) responsibility # to log messages! case "${retval}" in 0) # Program is running correctly # Do nothing here, let killproc continue. ;; 1) # Program is not running, but an invalid pid file exists # Remove the pid file. progname=${program##*/} if [[ -e "/run/${progname}.pid" ]]; then pidfile="/run/${progname}.pid" rm -f "${pidfile}" fi # This is only a success if no signal was passed. if [ -n "${nosig}" ]; then return 0 else return 7 fi ;; 3) # Program is not running and no pidfile exists # This is only a success if no signal was passed. if [ -n "${nosig}" ]; then return 0 else return 7 fi ;; *) # Others as returned by status values shall not be interpreted # and returned as an unspecified error. return 1 ;; esac # Perform different actions for exit signals and control signals check_sig_type "${signal}" if [ "${?}" -eq "0" ]; then # Signal is used to terminate the program # Account for empty pidlist (pid file still exists and no # signal was given) if [ "${pidlist}" != "" ]; then # Kill the list of pids for pid in ${pidlist}; do kill -0 "${pid}" 2> /dev/null if [ "${?}" -ne "0" ]; then # Process is dead, continue to next and assume all is well continue else kill "${signal}" "${pid}" 2> /dev/null # Wait up to ${delay}/10 seconds to for "${pid}" to # terminate in 10ths of a second while [ "${delay}" -ne "0" ]; do kill -0 "${pid}" 2> /dev/null || piddead="1" if [ "${piddead}" = "1" ]; then break; fi sleep 0.1 delay="$(( ${delay} - 1 ))" done # If a fallback is set, and program is still running, then # use the fallback if [ -n "${fallback}" -a "${piddead}" != "1" ]; then kill "${fallback}" "${pid}" 2> /dev/null sleep 1 # Check again, and fail if still running kill -0 "${pid}" 2> /dev/null && return 1 fi fi done fi # Check for and remove stale PID files. if [ -z "${pidfile}" ]; then # Find the basename of $program prefix=`echo "${program}" | sed 's/[^/]*$//'` progname=`echo "${program}" | sed "s@${prefix}@@"` if [ -e "/run/${progname}.pid" ]; then rm -f "/run/${progname}.pid" 2> /dev/null fi else if [ -e "${pidfile}" ]; then rm -f "${pidfile}" 2> /dev/null; fi fi # For signals that do not expect a program to exit, simply # let kill do its job, and evaluate kill's return for value else # check_sig_type - signal is not used to terminate program for pid in ${pidlist}; do kill "${signal}" "${pid}" if [ "${?}" -ne "0" ]; then return 1; fi done fi } ################################################################################ # pidofproc() # # Usage: pidofproc [-p pidfile] pathname # # # # Purpose: This function returns one or more pid(s) for a particular daemon # # # # Inputs: -p pidfile, use the specified pidfile instead of pidof # # pathname, path to the specified program # # # # Return values (as defined by LSB status codes): # # 0 - Success (PIDs to stdout) # # 1 - Program is dead, PID file still exists (remaining PIDs output) # # 3 - Program is not running (no output) # ################################################################################ pidofproc() { local pidfile local program local prefix local progname local pidlist local lpids local exitstatus="0" # Process arguments while true; do case "${1}" in -p) pidfile="${2}" shift 2 ;; *) program="${1}" if [ -n "${2}" ]; then # Too many arguments # Since this is status, return unknown return 4 else break fi ;; esac done # If a PID file is not specified, try and find one. if [ -z "${pidfile}" ]; then # Get the program's basename prefix=`echo "${program}" | sed 's/[^/]*$//'` if [ -z "${prefix}" ]; then progname="${program}" else progname=`echo "${program}" | sed "s@${prefix}@@"` fi # If a PID file exists with that name, assume that is it. if [ -e "/run/${progname}.pid" ]; then pidfile="/run/${progname}.pid" fi fi # If a PID file is set and exists, use it. if [ -n "${pidfile}" -a -e "${pidfile}" ]; then # Use the value in the first line of the pidfile pidlist=`/bin/head -n1 "${pidfile}"` # This can optionally be written as 'sed 1q' to repalce 'head -n1' # should LFS move /bin/head to /usr/bin/head else # Use pidof pidlist=`pidof "${program}"` fi # Figure out if all listed PIDs are running. for pid in ${pidlist}; do kill -0 ${pid} 2> /dev/null if [ "${?}" -eq "0" ]; then lpids="${lpids}${pid} " else exitstatus="1" fi done if [ -z "${lpids}" -a ! -f "${pidfile}" ]; then return 3 else echo "${lpids}" return "${exitstatus}" fi } ################################################################################ # statusproc() # # Usage: statusproc [-p pidfile] pathname # # # # Purpose: This function prints the status of a particular daemon to stdout # # # # Inputs: -p pidfile, use the specified pidfile instead of pidof # # pathname, path to the specified program # # # # Return values: # # 0 - Status printed # # 1 - Input error. The daemon to check was not specified. # ################################################################################ statusproc() { local pidfile local pidlist if [ "${#}" = "0" ]; then echo "Usage: statusproc [-p pidfle] {program}" exit 1 fi # Process arguments while true; do case "${1}" in -p) pidfile="${2}" shift 2 ;; *) if [ -n "${2}" ]; then echo "Too many arguments" return 1 else break fi ;; esac done if [ -n "${pidfile}" ]; then pidlist=`pidofproc -p "${pidfile}" $@` else pidlist=`pidofproc $@` fi # Trim trailing blanks pidlist=`echo "${pidlist}" | sed -r 's/ +$//'` base="${1##*/}" if [ -n "${pidlist}" ]; then /bin/echo -e "${INFO}${base} is running with Process" \ "ID(s) ${pidlist}.${NORMAL}" else if [ -n "${base}" -a -e "/run/${base}.pid" ]; then /bin/echo -e "${WARNING}${1} is not running but" \ "/run/${base}.pid exists.${NORMAL}" else if [ -n "${pidfile}" -a -e "${pidfile}" ]; then /bin/echo -e "${WARNING}${1} is not running" \ "but ${pidfile} exists.${NORMAL}" else /bin/echo -e "${INFO}${1} is not running.${NORMAL}" fi fi fi } ################################################################################ # timespec() # # # # Purpose: An internal utility function to format a timestamp # # a boot log file. Sets the STAMP variable. # # # # Return value: Not used # ################################################################################ timespec() { STAMP="$(echo `date +"%b %d %T %:z"` `hostname`) " return 0 } ################################################################################ # log_success_msg() # # Usage: log_success_msg ["message"] # # # # Purpose: Print a successful status message to the screen and # # a boot log file. # # # # Inputs: $@ - Message # # # # Return values: Not used # ################################################################################ log_success_msg() { /bin/echo -n -e "${BMPREFIX}${@}" /bin/echo -e "${CURS_ZERO}${SUCCESS_PREFIX}${SET_COL}${SUCCESS_SUFFIX}" # Strip non-printable characters from log file logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'` timespec /bin/echo -e "${STAMP} ${logmessage} OK" >> ${BOOTLOG} return 0 } log_success_msg2() { /bin/echo -n -e "${BMPREFIX}${@}" /bin/echo -e "${CURS_ZERO}${SUCCESS_PREFIX}${SET_COL}${SUCCESS_SUFFIX}" echo " OK" >> ${BOOTLOG} return 0 } ################################################################################ # log_failure_msg() # # Usage: log_failure_msg ["message"] # # # # Purpose: Print a failure status message to the screen and # # a boot log file. # # # # Inputs: $@ - Message # # # # Return values: Not used # ################################################################################ log_failure_msg() { /bin/echo -n -e "${BMPREFIX}${@}" /bin/echo -e "${CURS_ZERO}${FAILURE_PREFIX}${SET_COL}${FAILURE_SUFFIX}" # Strip non-printable characters from log file timespec logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'` /bin/echo -e "${STAMP} ${logmessage} FAIL" >> ${BOOTLOG} return 0 } log_failure_msg2() { /bin/echo -n -e "${BMPREFIX}${@}" /bin/echo -e "${CURS_ZERO}${FAILURE_PREFIX}${SET_COL}${FAILURE_SUFFIX}" echo "FAIL" >> ${BOOTLOG} return 0 } ################################################################################ # log_warning_msg() # # Usage: log_warning_msg ["message"] # # # # Purpose: Print a warning status message to the screen and # # a boot log file. # # # # Return values: Not used # ################################################################################ log_warning_msg() { /bin/echo -n -e "${BMPREFIX}${@}" /bin/echo -e "${CURS_ZERO}${WARNING_PREFIX}${SET_COL}${WARNING_SUFFIX}" # Strip non-printable characters from log file logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'` timespec /bin/echo -e "${STAMP} ${logmessage} WARN" >> ${BOOTLOG} return 0 } log_skip_msg() { /bin/echo -n -e "${BMPREFIX}${@}" /bin/echo -e "${CURS_ZERO}${SKIP_PREFIX}${SET_COL}${SKIP_SUFFIX}" # Strip non-printable characters from log file logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'` /bin/echo "SKIP" >> ${BOOTLOG} return 0 } ################################################################################ # log_info_msg() # # Usage: log_info_msg message # # # # Purpose: Print an information message to the screen and # # a boot log file. Does not print a trailing newline character. # # # # Return values: Not used # ################################################################################ log_info_msg() { /bin/echo -n -e "${BMPREFIX}${@}" # Strip non-printable characters from log file logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'` timespec /bin/echo -n -e "${STAMP} ${logmessage}" >> ${BOOTLOG} return 0 } log_info_msg2() { /bin/echo -n -e "${@}" # Strip non-printable characters from log file logmessage=`echo "${@}" | sed 's/\\\033[^a-zA-Z]*.//g'` /bin/echo -n -e "${logmessage}" >> ${BOOTLOG} return 0 } ################################################################################ # evaluate_retval() # # Usage: Evaluate a return value and print success or failure as appropriate # # # # Purpose: Convenience function to terminate an info message # # # # Return values: Not used # ################################################################################ evaluate_retval() { local error_value="${?}" if [ ${error_value} = 0 ]; then log_success_msg2 else log_failure_msg2 fi } ################################################################################ # check_signal() # # Usage: check_signal [ -{signal} ] # # # # Purpose: Check for a valid signal. This is not defined by any LSB draft, # # however, it is required to check the signals to determine if the # # signals chosen are invalid arguments to the other functions. # # # # Inputs: Accepts a single string value in the form of -{signal} # # # # Return values: # # 0 - Success (signal is valid # # 1 - Signal is not valid # ################################################################################ check_signal() { local valsig # Add error handling for invalid signals valsig=" -ALRM -HUP -INT -KILL -PIPE -POLL -PROF -TERM -USR1 -USR2" valsig="${valsig} -VTALRM -STKFLT -PWR -WINCH -CHLD -URG -TSTP -TTIN" valsig="${valsig} -TTOU -STOP -CONT -ABRT -FPE -ILL -QUIT -SEGV -TRAP" valsig="${valsig} -SYS -EMT -BUS -XCPU -XFSZ -0 -1 -2 -3 -4 -5 -6 -8 -9" valsig="${valsig} -11 -13 -14 -15 " echo "${valsig}" | grep -- " ${1} " > /dev/null if [ "${?}" -eq "0" ]; then return 0 else return 1 fi } ################################################################################ # check_sig_type() # # Usage: check_signal [ -{signal} | {signal} ] # # # # Purpose: Check if signal is a program termination signal or a control signal # # This is not defined by any LSB draft, however, it is required to # # check the signals to determine if they are intended to end a # # program or simply to control it. # # # # Inputs: Accepts a single string value in the form or -{signal} or {signal} # # # # Return values: # # 0 - Signal is used for program termination # # 1 - Signal is used for program control # ################################################################################ check_sig_type() { local valsig # The list of termination signals (limited to generally used items) valsig=" -ALRM -INT -KILL -TERM -PWR -STOP -ABRT -QUIT -2 -3 -6 -9 -14 -15 " echo "${valsig}" | grep -- " ${1} " > /dev/null if [ "${?}" -eq "0" ]; then return 0 else return 1 fi } ################################################################################ # wait_for_user() # # # # Purpose: Wait for the user to respond if not a headless system # # # ################################################################################ wait_for_user() { # Wait for the user by default [ "${HEADLESS=0}" = "0" ] && read ENTER return 0 } ################################################################################ # is_true() # # # # Purpose: Utility to test if a variable is true | yes | 1 # # # ################################################################################ is_true() { [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ] || [ "$1" = "y" ] || [ "$1" = "t" ] } # End /lib/lsb/init-functions